Product Details
Waterproof Fish Rod Heat Shrink Sleeving 1000x35mm
Technical Parameters
Product Type |
Heat shrink tube |
Material |
PE |
Flame retardant |
VW-1 |
Operation Temperature |
-40℃-125℃ |
Withstand Voltage |
600V |
Shrink ratio |
2:1 |
Water absorption |
<0.2% |
Shrinking temperature |
75-125℃ |
Usage |
Low Voltage,Sport equipment, fishing tool etc |
Introduction:
It is made from co-extrusion of polyvinyl and hot-melt adhesive, suitable for various electric insulation and bonding of cables and connectors, widely applied for connecting or end-handling, electric wire, corrosion-proof of metallic rods or tubes and antenna protection.
Detailed Images
Non-Slip Heat Shrink Tube Specification Table
|
Standard Specific
|
Inner diameter before shrink(mm)
|
Inner diameter after shrink(mm)
|
Standard Package (meter/piece) |
Inner diameter |
Average thickness |
Maximum inner diameter |
Average thickness |
Φ15mm |
≥15 |
0.45±0.15 |
8 |
0.85±0.15 |
1m/pcs 1.6m/pcs |
Φ20mm |
≥20 |
0.50±0.15 |
11 |
0.90±0.15 |
1m/pcs 1.6m/pcs |
Φ22mm |
≥22 |
0.50±0.15 |
12.5 |
0.90±0.15 |
1m/pcs 1.6m/pcs |
Φ25mm |
≥25 |
0.50±0.15 |
14.5 |
1.00±0.15 |
1m/pcs 1.6m/pcs |
Φ28mm |
≥28 |
0.50±0.15 |
15.5 |
1.00±0.15 |
1m/pcs 1.6m/pcs |
Φ30mm |
≥30 |
0.60±0.15 |
17.5 |
1.20±0.15 |
1m/pcs 1.6m/pcs |
Φ35mm |
≥35 |
0.60±0.15 |
20 |
1.20±0.15 |
1m/pcs 1.6m/pcs |
Φ40mm |
≥40 |
0.60±0.15 |
23 |
1.20±0.15 |
1m/pcs 1.6m/pcs |
Φ45mm |
≥45 |
0.65±0.15 |
25 |
1.25±0.15 |
1m/pcs 1.6m/pcs |
Φ50mm |
≥50 |
0.65±0.15 |
28 |
1.25±0.15 |
1m/pcs 1.6m/pcs |
If you need customized / special sizes, please to send an inquire to us. We will respond you in 24 hours.
http://www.gh-material.com/