Product Details
Overview
Cryogenic Planetary Ball Mill is a combination of planetary ball mill and refrigeration equipment. Most materials are heated due to friction or exothermic reactions during high-speed grinding, which may cause changes in the physical and chemical properties of the material and produce negative grinding effects. Low-temperature planetary ball mill is mainly used for material grinding processes that require strict temperature control.
Â
The Cryogenic Planetary Ball Mill has four ball milling tanks installed on a turntable. When the turntable rotates, the tank axis performs planetary motion, and the ball in the tank moves at high speed to grind and mix the sample. This product can be crushed by dry or wet methods and mixed with various products of different materials and particle sizes. The minimum particle size of grinding powder can be as small as 0.1mm.
Â
Features of Beifan Cryogenic Planetary Ball Mill
Cryogenic (low temperature control) planetary ball mill is a combination of planetary ball mill and air cooling device. The air cooling device adopts the principle of air conditioning compression refrigeration. The heat generated by grinding can be quickly removed through air-cooled gas circulation. Depending on the ambient temperature, the temperature of the ball milling space can be controlled between 5-15°C. This type of ball mill is mainly used for ultra-fine grinding of materials under low temperature process conditions. The invention has the advantages of simple structure, convenient operation, convenient maintenance and low energy consumption.
Â
1. Suitable for materials that require low-temperature ultra-fine crushing.
2. Simple structure.
3. Simple operation.
4. Easy maintenance.
5. Low energy consumption.
Â
Application areas
Low-temperature planetary ball mills are widely used in geology, minerals, metallurgy, electronics, building materials, ceramics, chemical industry, light industry, medicine, environmental protection and other departments. Suitable for electronic ceramics, structural ceramics, magnetic materials, lithium cobalt oxide, lithium manganate, catalysts, phosphors, long afterglow phosphors, rare earth polishing powders, electronic glass and other production fields. Powder and fuel cell production, zinc oxide varistors, piezoelectric ceramics, nanomaterials, wafer ceramic capacitors, MLCC, thermistors (PTC, NTC), ZnO varistors, dielectric ceramics, alumina ceramics, zirconium oxide Ceramics, phosphor powder, zinc oxide powder, cobalt oxide powder, nickel zinc ferrite, manganese zinc ferrite, etc.
Â
Technical Data Sheet of BEIFAN Planetary Ball Mill
Drive Mode
|
Gear drive
|
Operation Mode
|
Two or four mill jars can be used for each grinding
|
Max Capacity for Materials
|
Less than 1/3 of each jar volume
Total max capacity: less than 1/3 of total jars volume
|
Feed Size
|
Soft and crispy materials ≤ 10mm
Other hard materials ≤ 3mm
|
Output Granularity
|
Smallest granularity can be achieved to 0.1μm
|
Rotation Speed Ratio
|
1:2
|
Max Continuous Operating Time
|
72 Hours
|
Materials of Available Mill Jars
|
304 Stainless steel, 316l stainless steel, Zirconia, Nylon, PU,
Alumina ceramic (corundum), PTFE, Agate, Tungsten carbide
|
Remarks: Cryogenic planetary ball mill is combination of planetary ball mill plus air-cooling device, which can be equipped with vertical planetary ball mill, horizontal planetary ball mill, full-directional planetary ball mill.
Table 1 Technical Parameters For Cryogenic Planetary Ball Mill
Model No.
|
Voltage
|
Power
|
Rotation Speed
|
Noise
|
XQM-1(C)
|
220V-50Hz
|
0.75KW
|
70-670 rpm
|
Less than 60db
|
XQM-2(C)
|
220V-50Hz
|
0.75KW
|
70-670 rpm
|
Less than 60db
|
XQM-4(C)
|
220V-50Hz
|
0.75KW
|
70-670 rpm
|
Less than 60db
|
XQM-6(C)
|
220V-50Hz
|
0.75KW
|
70-670 rpm
|
Less than 60db
|
XQM-8(C)
|
220V-50Hz
|
1.5KW
|
70-580 rpm
|
Less than 60db
|
XQM-10(C)
|
220V-50Hz
|
1.5KW
|
70-580 rpm
|
Less than 60db
|
XQM-12(C)
|
220V-50Hz
|
1.5KW
|
70-580 rpm
|
Less than 60db
|
XQM-20(C)
|
380V-50Hz
|
4.0KW
|
50-430 rpm
|
Less than 65db
|
XQM-40(C)
|
380V-50Hz
|
5.5KW
|
40-390 rpm
|
Less than 68db
|
XQM-60(C)
|
380V-50Hz
|
7.5KW
|
40-260 rpm
|
Less than 68db
|
XQM-100(C)
|
380V-50Hz
|
11KW
|
40-260 rpm
|
Less than 68db
|
Table 2 Technical Parameters For Cryogenic Planetary Ball Mill
Model No.
|
Speed Control
|
Net Weight
|
Net Dimensions
|
XQM-1(C)
|
Frequency Control
|
93kgs
|
750*470*564mm
|
XQM-2(C)
|
Frequency Control
|
93kgs
|
750*470*564mm
|
XQM-4(C)
|
Frequency Control
|
93kgs
|
750*470*564mm
|
XQM-6(C)
|
Frequency Control
|
93kgs
|
750*470*564mm
|
XQM-8(C)
|
Frequency Control
|
150kgs
|
900*600*640mm
|
XQM-10(C)
|
Frequency Control
|
150kgs
|
900*600*640mm
|
XQM-12(C)
|
Frequency Control
|
150kgs
|
900*600*640mm
|
XQM-20(C)
|
Frequency Control
|
330kgs
|
1200*750*920mm
|
XQM-40(C)
|
Frequency Control
|
468kgs
|
1400*850*1160mm
|
XQM-60(C)
|
Frequency Control
|
900kgs
|
1600*990*1250mm
|
XQM-100(C)
|
Frequency Control
|
1250kgs
|
1750*1140*1330mm
|
Â
http://www.beifanequip.com/